Contact Us

Add: 76 Haiqu Road, Rizhao City, Shandong, China

Tel: +86-633-8010302

Fax: +86-633-8010301

mobile: +86-13616336982

Email: sales@yufungprimachem.com

Skype: david.zhou.cn.
 

Material Safety Data Sheet(MSDS)

MSDS3011 SODIUM ACETATE ANHYDROUS

24/08/2016    source£º    Author£º  Viewed£º1348

PRIMA CHEM INTERNATIONAL CO., LIMITED

Add:76 Haiqu Road,Rizhao City,Shandong,China

Tel: +86-633-8010302  Fax: +86-633-8010301

MSDS 3011A

Creation Date 19.03.2009   Revision Date 26.05.2013

 

SODIUM ACETATE ANHYDROUS

MATERIAL SAFETY DATA SHEET (MSDS)

 

1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY

 

Product Name:

Sodium Acetate Anhydrous

Chemical Name:

Sodium Acetate ; Sodium Acetate Anhydrous;

Synonyms:

Acetic Acid, Sodium Salt; Sodium Acetate; INS No. 262(i)

CAS No.:

127-09-3 (Anhydrous);

Chemical Formula:

C2H3NaO2 / CH3COONa

Formula weight:

82.03;

UN CODE:

N/A

EINECS No:

204-823-8 (Anhydrous);

ICSC No.:

0565

RTECS No.:

AJA4300010

Description:

Anhydrous: White, odourless, granular, hygroscopic powder.

Product Use:

Sodium acetate is a common chemical that has a wide variety of uses in several industries, including medical, food, textile, and health and beauty. It is the derivative of sodium from acetic acid.

1) For Medical Use:Sodium acetate is used for IVs to restore sodium to the blood.

2) Food Preparation Use: Sodium acetate can give salt and vinegar chips their flavor, while also acting as a preservative. The food industry also uses it to improve the flavor of meat and poultry.

3) Fof Cosmetic Use: In the health and beauty industry, sodium acetate is used to make soap and a variety of cosmetic products.

4) For Water treatment Use: sodium acetate is being used for water treatment, as opposed to the less environmentally-friendly methanol.

5) For Textile Use: Sodium acetate removes calcium from fabric, lengthening its life.

Supplier:

Prima Chem International Co., Limited

Add:76 Haiqu Road,Rizhao City,Shandong,China

Tel:+86-633-8010307 Fax:+86-633-8010301

Emergency Calling:

+86-633-8010307

 

2. HAZARDS IDENTIFICATION

 

EMERGENCY OVERVIEW

Hygroscopic (absorbs moisture from the air).

 

Potential Health Effects:

Skin:

May causes irritation to skin.

Eye:

May cause mild eye irritation.

Inhalation:

May cause respiratory tract irritation.

Ingestion:

May cause irritation of the digestive tract.

Chronic:

No information found.

 

3. COMPOSITION/INFORMATION ON INGREDIENTS

 

Ingredient

CAS No.

Percent

Hazardous

Sodium Acetate Anhydrous

127-09-3

100%

Not listed

Production Standard: GB/T 694-1995; GB/T 693-1996

 

4. FIRST AID MEASURES

 

Eye Contact:

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Skin Contact:

Get medical aid immediately. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Inhalation:

Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Ingestion:

If victim is conscious and alert, give 2-4 cupfuls of milk or water.

Never give anything by mouth to an unconscious person. Get medical aid.

Other First Aid:

Notes to Physician: Treat symptomatically and supportively.

 

5. FIRE FIGHTING MEASURES

 

General Information:

As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Combustion generates toxic fumes.

Fire:

Not considered to be a fire hazard.

Explosion:

Not considered to be an explosion hazard.

Fire Extinguishing Media:

For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.

NFPA 704:

NFPA Rating:

 

 

 

 

 

 

6. ACCIDENTAL RELEASE MEASURES

 

General information:

Use proper personal protective equipment as listed in section 8.

Spills/Leaks:

Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.  Provide ventilation.

 

7. HANDLING AND STORAGE

 

Handling:

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid breathing dust.

Storage:

Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

 

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

 

    

Engineering Controls:

Good general ventilation should be sufficient to control airborne levels.

Exposure Limits

ACGIH: not listed;

NIOSH: Not listed;

OSHA - Final PELs: not listed.

Personal Protective Equipment

Ventilation System:

 

A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.

Personal Respirators (NIOSH Approved):

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Skin Protection:

Wear protective gloves and clean body-covering clothing.

Eye Protection:

 

Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Other Control Measures:

 

Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards.

 

9. PHYSICAL AND CHEMICAL PROPERTIES

 

Physical State:

Solid.

Appearance:

White Crystalline Powder.

Odor:

Odorless.

Boiling Point:

Not Applicable.

Evaporation Rate:

Not Available.

Melting Point:

328 ¡æ

Freezing Point:

Not Available.

Specific Gravity /Density:

1.528

Vapour Density:

Not Available.

Vapour Pressure:

Not Available.

pH:

7.5-9.5.

Flash Point:

Not Applicable.

Volatility (% by volume):

Not Available.

Coefficient of Water to Oil distribution:

Not Available.

Solubility:

Easily soluble.

 

10. STABILITY AND REACTIVITY

 

Chemical Stability:

Stable under normal temperatures and pressures.

Conditions to Avoid:

Exposure to moist air or water.

Incompatible Substances:

Strong oxidizers.

Hazardous Decomposition Products:

Carbon monoxide, carbon dioxide.

Hazardous Polymerization:

Will not occur.

 

11. TOXICOLOGICAL INFORMATION

 

LD50/LC50:

Not Available.

Effects of Acute Exposure:

None known.

Effects of Chronic Exposure:

None known

General Irritancy of Product:

Slight

Sensitization:

Not Available.

Carcinogenicity:

Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Reproductive Toxicity:

Not Available

Teratogenicity:

Not Available

Embryotoxicity:

Not Available

Mutagenicity:

Not Available

Synergistic Products:

Not Available

 

12. ECOLOGICAL INFORMATION

 

Ecotoxicity:

Not Available

Environmental Fate:

Not Available

 

13. DISPOSAL CONSIDERATIONS

 

Waste Disposal:

All waste should be disposed of according to Federal, Provincial and local regulations. Containers should NOT be reused. Containers should be disposed of in accordance with local government regulations.

 

14. TRANSPORT INFORMATION

 

DOT, IATA, IMO/IMDG, RID/ADR, GHS: Not regulated as a hazardous material.

Non-hazardous for air, sea and road transport.

 

15. REGULATORY INFORMATION

 

DSCL (EEC):

This product is not classified according to the EU regulations. Not applicable.

TSCA:

Listed.

OSHA:

No information available.

WHIMS:

Not controlled under WHMIS (Canada).

HMIS (U.S.A.):

Health Hazard: 2  

Fire Hazard: 1   

Reactivity: 0 

Personal Protection: E

NFPA (U.S.A):

Health: 2        

Flammability: 1    

Reactivity: 0  

Specific hazard:

GB (ChinaStandard):

GB12268-2005 List of dangerous goods: not Listed.

 

16. OTHER INFORMATION

 

Packing:   25kg/50kgor 1MT jumbo PP woven bags.

 

Disclaimer:

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes.

 

PRIMA CHEM INTERNATIONAL CO., LIMITED